How To Start - Kenmore 2029219 - Canister Vacuum Use And Care Manual

CAUTION
Moving parts! To reduce the risk of personal injury,
DO NOT touch the agitator when vacuum cleaner is
on. Contacting the agitator while it is rotating can
cut, bruise or cause other injuries. Always turn off
and unplug from electrical outlet before servicing..
Use caution when operating near chitdren..
HOW TO START
, WARNING
Personal Injury and Product Damage
Hazard
DO NOT plug in if switch is in ON
position,, Personal injury or property
damage could result°
The cord moves rapidly when
rewinding° Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury°
DO NOT use outlets above counters°
Damage from cord to items in
surrounding area could occur,.
1. Pult cord out of
canister to desired
length
2. Snap cord into
grip to prevent
accidental
rewinding..
3oPlug the polarized power cord into a I20
Volt outlet located near the floor-
NOTE: To reduce the risk of electric
shock, this vacuum cleaner has a polar-
ized ptug; one blade is wider than the other..
This plug will fit in a polarized outlet only
one way If the plug does not fit fully in the
outlet, reverse the plug If it still does not fit,
contact a qualified electrician to install the
proper outlet Do not change the plug in any
way,
To rewind:Turn off and unplug the vacuum
cleaner, Remove cord from grip, Hold the
plug while rewinding to prevent damage or
injury from the moving cord A slight tug will
release the locking pawls in the cord reel
allowing it to retract,
4. Lower wand from upright position by
pressing on the handle release pedal
Pile
Pedal-_
!
__,_ lPtle Height
cator
5, Select a pile height setting by pressing
the small pedal on the rear of the Power-
Male, The pile height setting shows on the
indicator See SUGGESTED PILE HEIGHT
SETTINGS