Connect The Disk Drives - HP Model 744 - VME Workstation Installation And Service Manual

6. Connect the disk drives.

a.
Connect the FWD SCSI cable to the connector on the FWD SCSI adapter, as shown
in Figure 2–6. Be sure to firmly tighten the screws on the connector.
b.
Connect the other end of the FWD SCSI cable to the peripheral box.
c.
Be sure to terminate the last device in the FWD SCSI bus, or use an external
terminator.
Figure 2–6. Connecting the SCSI Cable
Installing the FWD SCSI Adapter
2–9