Install Fwd Scsi Adapter Card - HP Model 744 - VME Workstation Installation And Service Manual

Installing the FWD SCSI Adapter

4. Install FWD SCSI Adapter card.

a.
Align the connector on the FWD SCSI adapter with the cutout on the front extension
plate. See Figure 2–4.
b.
Align the connector on the bottom of the adapter with the connector on the GSC
expansion adapter. See Figure 2–4.
c.
Gently press down on the adapter until the connectors are fully seated.
d.
Insert the the two screws provided in the kit through the top of the adapter into the
two standoffs on the GSC expansion adapter. See Figure 2–4.
2–6
Figure 2–4. Installing the FWD SCSI Adapter