Instructions For Building-In - AEG K 818 40 i Operating And Installation Instructions

Instructions for building-in

Apply joint the sealing strip as shown
in figure.
An additional midpoint location
bracket may be fitted to the appli-
ance (as shown) to assist retention of
the housing side wall.
Drill the unit using a
(10 mm max. penetration.
Fix the square fitting (1) to the appli-
ance.
Push appliance into the housing
until stop strip (A) touches the
kitchen unit.
D765
2,5 mm drill
D740
D015/1
Ø 2,5
13mm
A
21