Related Manuals for AEG K 818 40 i
Summary of Contents for AEG K 818 40 i
- Page 1 SANTO K 8 18 40 i Integrating Fridge Freezer Operating and Installation Instructions...
- Page 2 Dear customer, Before placing your new refrigerator/freezer into operation please read the- se operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
-
Page 3: Table Of Contents
Contents Safety ...........4 Disposal . -
Page 4: Safety
Safety Please read this instruction book before using the appliance and retain for future reference. These warnings are provided in the interests of your safe- ty, ensure you understand them fully before using the appliance. Intended use • The appliance is intended for use in the home. It is suitable for the coo- ling, freezing and storing of frozen food, as well as for making ice. -
Page 5: Disposal
• Bottles and cans must not be placed in the freezer compartment. They can burst when the contents freeze, high carbonate content drinks can even explode! Never store lemonade, juices, beer, wine, sparkling wine etc. in the freezer compartment. -
Page 6: Disposal Of Old Appliances
Disposal of old Appliances For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - to your new appliance as well. Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures, to prevent small children being trapped inside. -
Page 7: Starting Up And Temperature Regulation
0°C. You should reset the temperature control knob to setting “3” or “4”, if this does occur. As soon as the fresh food placed in the freezer has frozen, return the tem- perature control knob to “3” or “4”. Important! High ambient temperatures (e.g. -
Page 8: Interior Accessories
Interior Accessories Storage Shelves The glass shelf above the fruit and vegetable compartment always remain in position, to ensure fruit and vegetables stay fresh longer. The remaining storage shelves can be adjusted to various heights: Pull the storage shelf forward until it can be tipped up or down and remo- ved. -
Page 9: Freezing And Storing Frozen Food
• Bottles and cans must not be placed in the freezer. They can burst when the contents freeze, high carbonate content drinks can even explode! Never store lemonade, juices, beer, wine, sparkling wine etc. -
Page 10: Preparation Of Ice Cubes
Preparation of Ice Cubes Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze. To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds. -
Page 11: Switching Off The Appliance
However when the ice becomes very thick on the inner liner, complete defrosting should be carried out as follows: Remove the frozen food from the freezer, wrap it in several layers of new- spaper and put it in a very cool place. -
Page 12: Cleaning And Care
Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! Before carrying out any cleaning or maintenance, disconnect the appliance from the electricity supply. • Never clean the appliance with a steam cleaner. Moisture could accumu- late in electrical components, which could cause an electrical shock! Hot vapours can lead to the damage of plastic parts. -
Page 13: Energy Saving Tips
Energy Saving Tips • Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor. • Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. -
Page 14: Something Not Working
Something Not Working If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Warning! Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning. -
Page 15: Changing The Light Bulb
Symptom The compressor does not start immediately after changing the temperature setting. Water on the floor or on sto- rage shelves. If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. -
Page 16: Service And Spare Parts
Service and Spare Parts If you require a service engineer or wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 0870 5 929929 Help us to help you Please determine your type of enquiry before telephoning. When you con- tact us we need to know: 1.Your name, address and post code 2.Your telephone number... -
Page 17: Guarantee Conditions
Guarantee Conditions Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documen- tation. -
Page 18: Installation
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. -
Page 19: Installation Location
Installation Location This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rat- ing plate, which is located on the inside left of the appliance. The following table shows which ambient temperature is correct for each climate classification. -
Page 20: Inner Door Reversal
Inner door reversal Using a screwdriver release bracket (1) by pressing on the internal spring and withdraw it from its seat together with the door; remove plug (2) and fit it in the hole left open on the opposite side; turn the door through 180°, remove the bracket (1) and refit it on the opposite side. -
Page 21: Instructions For Building-In
Instructions for building-in Apply joint the sealing strip as shown in figure. An additional midpoint location bracket may be fitted to the appli- ance (as shown) to assist retention of the housing side wall. Drill the unit using a (10 mm max. penetration. Fix the square fitting (1) to the appli- ance. - Page 22 Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges. Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap ventilation grille (C) and hinge cover (D) into position. Apply covers (B) into the relevant holes.
- Page 23 Place guide (A) on the inside part of the furniture door, in the upper and lower positions as shown in the fig- ure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied. PR166 Fix cover (C) on guide (A) until it clips into place.
-
Page 24: Regulations, Standards, Guidelines
At the end of installation/adjusting, it is necessary to check if the door of the furniture closes properly. Should adjustment of the furniture door be necessary, use the clearance of slots. Fix cover (D) on guide (B) until it clips into place. - Page 28 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de 2222 221-42...