Passwords - VTech IP8100-2 - Wireless VoIP Phone Owner's Manual

Admin Settings

Passwords

Changing the default user password is not required by the IP800 series tele-
phone, but it can help prevent unauthorized tampering with the IP800 series
telephone's settings. Once a password is set, only those who know the pass-
word will be allowed to change or view settings.
Note: Write down the password and store it in a secure place. If you forget, you
will not have access to any settings until you reset the IP800 series telephone
to factory default setting. For more information on factory default setting, please
refer to Admin / Restore Settings.
User Management
• Enter a new password to replace the default password VTech. Confirm by
re-entering the new password in the field below.
Click Apply to save the page settings. Clicking Cancel aborts any changes you
have made on the page.
33