VTech IP8100-2 - Wireless VoIP Phone Owner's Manual page 27

Basic Settings
Note: When entering the numbers, remember that each number must be in the
correct format (four sets of numbers separated by periods, with no spaces).
• IP Address: Enter the value assigned by your ISP.
• Subnet Mask: Enter the value assigned by your ISP.
• ISP Gateway Address: Enter the value assigned by your ISP.
• Primary DNS Address: Enter the value assigned by your ISP.
• Secondary DNS Address: Enter the value assigned by your ISP.
• MAC Address: This defaults to the MAC (Media Access Control) address of
the WAN port in the IP800 series telephone. If your ISP has registered the
MAC address of your computer, you can manually enter it here, or use the
DHCP Client List to copy it.
• DHCP Client List: Lists MAC addresses of devices that have obtained a
DHCP lease from the IP800 series telephone. If your ISP has registered the
MAC address of your computer, select that MAC address from the list, click
Copy, then click Apply to save the page settings. Clicking Restore takes you
back to the default MAC address value.
25