HP C7401A - SureStore Ultrium 230 Tape Drive User Manual page 20

hp surestore ultrium 230m
data protection
index of topics
contact hp
home page
before you start
operation
cartridge care
cleaning
one-button disaster
recovery
specifications
ultrium 230i
ultrium 230e
ultrium 230m
diagnostics
troubleshooting
FAQs
SCSI configuration
UNIX configuration
ordering supplies
file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/Ultrium/document/ultrium/user/reseller/eng/230m.htm [11/14/2001 8:10:20 AM]
issued october 2000 :
hp surestore ultrium 230m
contents of this section
features
specifications
physical specification
power requirements
performance
operating limits
non-operating limits
safety and electromagnetic compatibility
features
The HP SureStore Ultrium 230m combines capacity and performance with
reliability and low cost of ownership, making it the ideal choice for network
backup. Your new tape drive provides the following key features:
Latest Ultrium Generation 1 technology
Capacity of 100 gigabytes (native) on a single HP Ultrium cartridge
Built-in read-after-write verification for a high level of data integrity
Sustained transfer rate of 15 MB/s (native)
Data Rate Matching (DRM)
Intelligent LTO-DC dual-mode compression algorithm
Failsafe leader capture mechanism
LTO-Cartridge Memory
TapeAlert support for worry-free backup
HP Library & TapeTools
troubleshoot problems
HP One-Button Disaster Recovery
Ultra 2 Wide SCSI interface
specifications
physical specification
power requirements
power consumption +5V @ 5.2A typical
performance
sustained transfer rate native 15 MB/sec
burst transfer rate 80 MB/sec (Ultra2 SCSI wide)
file access time (from BOT) 71s typical
rewind tape speed 4.1 m/s
operating limits
maximum wet bulb temperature 26°C (78°F)
temperature gradient < 10°C per hour
operating altitude 0 to 4000 m (0 to 15,000 ft)
non-operating limits
non-operating altitude 0 to 15,250 m (0 to 50,000 ft)
safety and electromagnetic compatibility
CSA Certification to C22.2, No. 950 Amd 4
UL Listed to UL 1950 Amd 4
CE Declaration of Conformity CE 73/23/EEC Amended by (93/68/EEC)
TUV Product Service (TUV EN60950 and IEC 950)
GOSH CB report with deviations
FCC 47 CFR Parts 2 & 15 with reference to ANSI C63.4:1992 (CISPR
22:1985 with amendments)
CE Declaration of Conformity CE 73/23/EEC Amended by (93/68/EEC)
C-TICK Approved (AS/NZS 3548)
RRL Approved (RRL MIC No. 1996-18)
BCIQ Approved (CNS 13438)
http://www.hp.com/go/support/tape
software to verify successful installation and
compatible (available Spring 2001)
dimensions 208 mm (8.2") W
122 mm (4.8") H
298 mm (11.7") D
weight 5.3 kg (11.7 lbs)
+12V @ 0.7A typical
+5V @ 6.3A (max)
+12V @2.75A (max)
All power for rack-mounted drives is
provided by the HP Surestore H/A Tape
Array 5500 or similar rack unit.
interface Ultra wide SCSI-2
recording format LTO Ultrium Generation 1
media LTO Ultrium
capacity 100 GB (native)
compressed 30 MB/sec (assumes 2:1
compression)
142s maximum
load to BOT < 25s
unload from BOT < 13s
rewind time 142s (100 GB tape)
reposition time 2.5s
temperature 10°C to 35°C (50°F to 95°F)
humidity 20 to 80 RH (non-condensing)
30%/hr maximum operating humidity
rise
airflow 0.17 cubic meters per minute (6 cubic
feet per minute)
Positive airflow must be maintained
vibration 0.3G pk 5-250 Hz (sine)
0.3G rms 5-250 Hz (random)
shock survival 5G 3ms (no performance change)
2G 11ms (no performance change)
8G 11ms (no data loss)
temperature -40°C to 66°C (-40°F to 151°F)
humidity 10 to 95 RH (non-condensing)
temperature rise 20°C per hour
humidity rise 30%/hr
noise level <5.0 bel sound power
vibration 0.75G pk 5-500 Hz (sine)
2.41G rms 5-500 Hz (random)
shock survival 90G 3ms (half sine)
30G 26ms (trapeziodal)
hp learning products
may have a later version
© 2000, Hewlett-Packard Company