Panasonic Lumix DMC-GH1K Operating Instructions Manual page 34

Preparation
• Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
• [POWER SAVE] is set to [5MIN.] in the Intelligent Auto Mode.
• [POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
• Press any button to turn on the LCD monitor again.
• It is recommended to use this mode with [LVF/LCD AUTO] (P126) in the [CUSTOM MENU]
menu is set to [OFF].
• [ECONOMY] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
o [AUTO REVIEW]
• If [REVIEW] is set to [HOLD], the playback screen display can be switched (P57) during Auto
Review when taking pictures with the drive mode lever set to [
• When [HOLD] has been selected, the zoom time cannot be set.
• The Auto Review function is activated regardless of its setting when using Burst Mode (P72) or
Auto Bracket (P74) and when recording still pictures with audio (P124). (Will not enlarge/hold)
Also, you cannot set the Auto Review function.
• If [HIGHLIGHT] (P34) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
• [AUTO REVIEW] does not work when recording motion pictures.
[HIGHLIGHT]
• If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P71) referring to the histogram (P64) and
then taking the picture again. It may result in a better
quality picture.
• There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will
become white saturated and appear blinking in black and white.
• The LCD/EVF will display overexposed portions of the image as white blinking areas. These
only exist on the camera's display, not on the actual photo.
• This does not work while in Multi Playback (P57), Calendar Playback (P58), or Playback Zoom
(P58).
34
VQT2A61
Set the length of time that the picture is displayed after taking it.
[REVIEW]:
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed
halfway.
[ZOOM]:
The picture enlarged 4k is displayed.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
] (P51) or [ ] (P76).
[ON] [OFF]