Single Picture; Print Settings - Panasonic Lumix DMC-GH1K Operating Instructions Manual

Connecting to other equipment
Press 3 to select [SINGLE PICTURE] and then
press [MENU/SET].
Press 2/1 to select the picture and then press 4.
• The message disappears in about 2 seconds.
Press 3/4 to select [PRINT START] and then
press [MENU/SET].
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
Select and set the items both on the screen in step
"Single picture" procedures.
• When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to
[{] and then set the paper size or the layout on the printer. (For
details, refer to the operating instructions of the printer.)
Item
[OFF]
[ON]
• If the printer does not support date printing, the date cannot be printed on the picture.
• Since the printer's settings may take precedence over the print with date setting, check the
printer's print with date setting as well.
• When printing images with a text stamp, please remember to set print with date to [OFF] or the
date will print on top.
Note
When asking the photo shop to print the pictures
• By stamping the date using [TEXT STAMP] (P136) or setting date printing at the time of the
[PRINT SET] (P142) setting before going to a photo shop, the dates can be printed at the photo
shop.
156
VQT2A61
[PRINT WITH DATE]
Date is not printed.
Date is printed.

Single picture

Print Settings

Description of settings
PictBridge
SINGLE PICTURE
PRINT SET (DPOF)
SELECT
PictBridge
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
3
of the
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
MENU
SET
100 _ 0001 100 _ 0001 100 _ 0001
100 0001
MENU
EXIT
OFF
1
MENU
SELECT SET
OFF
1
MENU
SELECT EXIT