Asus ESC700 G2 User Manual page 100

User manual
Table of Contents

Advertisement

Turbo Mode [Enabled]
It automatically allows processors cores to run faster than the base operating frequency if it's
operating below power, current, and temperature specification limit.
Configuration options: [Disabled] [Enabled]
Turbo Mode Parameters
Long Duration Power Limit [Auto]
This item is Power Limit 1 in Watts. Default setting of this item is TDP
(130W). For Sandy Bridge-E, Turbo Ratio can be kept a time duration
exceeding TDP for maximum performance. Any value under 255 can be
programmed. Use the <+> and <-> keys to adjust the value.
Long Duration Maintained [Auto]
This item is Power Limit 1 Time in second. The value can vary from 1 to 32,
which indicates that the time window for Turbo Ratio over TDP should be
maintained. Use the <+> and <-> keys to adjust the value.
Short Duration Power Limit [Auto]
This item is Power Limit 2 value in Watts. It is the second power limit to
provide rapid protection when package power exceeds Power Limit 1. Default
setting is 1.25 times Power Limit 1. Intel recommends that the platform must
be capable of supporting over Power Limit 2 for up to 10 msec. ASUS board
can support over Power Limit 2 for a long duration. Use the <+> and <-> keys
to adjust the value.
Additional Turbo Voltage [Auto]
Maximum additional voltage can be applied to the CPU when Turbo Boost is
engaged. Use the <+> and <-> keys to adjust the value.
CPU Core Current Limit [Auto]
This item allows user to enter CPU Core Current Limit, unit in 0.125A. Use
the <+> and <-> keys to adjust the value.
CPU VCORE Voltage [Offset Mode]
This adjusts the power supply for the processor cores and cache to help core frequency
overclocking.
[Manual Mode]
[Offset Mode]
CPU VCORE Manual Voltage [Auto]
This item appears only when you set the CPU VCORE Voltage item to
[Manual Mode] and allows you to set a fixed CPU VCORE voltage. The
values range from 0.800V to 1.700V with a 0.005V interval.
Offset Mode Sign [+]
This item appears only when you set the CPU VCORE Voltage item to [Offset Mode].
[+]
[–]
4-26
Allows you to set a fixed CPU VCORE voltage.
Allows you to set the Offset voltage.
To offset the voltage by a positive value.
To offset the voltage by a negative value.
Chapter 4: BIOS setup

Advertisement

Table of Contents
loading

Table of Contents