Table of Contents
Advertisement
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard disk
drives when you delete a RAID set.
To delete a RAID set:
From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The
1.
following screen appears:
Name
Volume0
[↑↓]-Select
2.
Use the up/down arrow key to select the RAID set you want to delete, and then press
<Del>. The following warning message appears:
3.
Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to
return to the DELETE VOLUME menu.
Exiting the Intel
To exit the utility:
From the utility main menu, select 5. Exit, and then press <Enter>. The following
1.
warning message appears:
2.
Press <Y> to exit or press <N> to return to the utility main menu.
5-6
Intel(R) Rapid Storage Technology - Option ROM - v3.0.0.1184
Copyright(C) 2003-11 Intel Corporation.
[
Level
RAID0(Stripe)
Deleting a volume will reset the disks to non-RAID.
WARNING:
(This does not apply to Recovery volumes)
[ESC]-Previous Menu
[
DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete volume "Volume0"? (Y/N):
Rapid Storage Technology Option ROM utility
®
[
CONFIRM EXIT
Are you sure you want to exit? (Y/N):
DELETE VOLUME MENU
]
Drives
Capacity
2
298.0GB
[
HELP
]
ALL DISK DATA WILL BE DELETED.
]
]
All Rights Reserved.
Status
Bootable
Normal
Yes
[DEL]-Delete Volume
Chapter 5: RAID configuration
Advertisement
Table of Contents
