Asus ESC700 G2 User Manual page 110

SATA3G_5 (Blue)
Hot Plug [Disabled]
This item appears only when you set the previous item to [AHCI Mode] and [RAID mode]. It
allows users to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled].
SATA3G_6 (Blue)
Hot Plug [Disabled]
This item appear only when you set the previous item to [AHCI Mode]. It's allow user to
enabled/disabled SATA Hot Plug Support. Configuration options: [Disabled] [Enabled].
UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
SATA Configuration
SATA Mode
Serial-ATA Controller 0
Serial-ATA Controller 1
S.M.A.R.T. Status Check
SATA 6G_1 (Gray)
SATA 6G_2 (Gray)
SATA 3G_3 (Blue)
SATA 3G_4 (Blue)
SATA 3G_5 (Blue)
SATA 3G_6 (Blue)
The following two items appear only when you set the SATA Mode item to [IDE
Mode].
Serial-ATA Controller 0 [Enhanced]
Allows you to enabled/disabled the Serial-ATA Controller 0.
Configuration options: [Disabled] [Enhance] [Compatible]
Serial-ATA Controller 1 [Enhanced]
Allows you to enabled/disabled the Serial-ATA Controller 1.
Configuration options: [Disabled] [Enhance]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST.
Configuration options: [Disabled] [Enabled]
4-36
Ai Tweaker
Advanced
SATA Configuration >
Monitor Boot
(1) IDE Mode. (2) AHCI Mode. (3)
RAID Mode.
IDE Mode
Enhanced
Enhanced
Enabled
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Exit
Tool
Chapter 4: BIOS setup