Table of Contents
Advertisement
2.7.2
Installing expansion cards
Ensure to unplug the power cable before installing or removing an expansion
card. Failure to do so may cause severe damage to the motherboard and other
system components!
To install an expansion card
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
Remove the left side cover from the chassis.
3.
Lay the system on its side on a flat, stable surface.
4.
Select the slot that you intend to use, and then remove the metal bracket next to the
slot.
5.
Align the card golden fingers to the slot
and its metal bracket to the slot opening
on the chassis.
6.
Press the card firmly until it is properly
seated on the slot.
7.
Secure the card to the chassis with the
bracket screw you removed earlier.
ASUS ESC700 G2
2-19
Advertisement
Table of Contents
