Front Panel Leds; I/O Module Leds - Asus DS300f Quick Start Manual

ASUS Storage DS300j Quick Start Guide
Task 6: Connecting the Power
Plug the power cords into the power supplies on the back of the ASUS Storage
DS300j unit and switch on the power supplies.
When the power is switched on, the LEDs light up.

Front Panel LEDs

When boot-up is finished and the ASUS Storage DS300j unit is functioning
normally:
•
Power and Global Enclosure Status LEDs display green continuously.
•
I/O Module Activity LED flashes green when there is controller activity.
•
System Heartbeat LED blinks green once per second.
Figure 9. Front panel LED display

I/O Module LEDs

When boot-up is finished and the ASUS Storage subsystem is functioning
normally:
•
Fan LEDs display green continuously.
•
SAS port LEDs flash green when there is activity.
After you turn the power supply switches off, you must wait at least
10 seconds before you turn the power switches on again.
Caution
Power
Global Enclosure Status
Reserved
I/O Module Activity
Reserved
System Heartbeat
12