Asus DS300f Quick Start Manual page 4

ASUS Storage DS300j Quick Start Guide
Task 2: Mounting ASUS Storage in a Rack
The ASUS Storage DS300j unit installs to the rack using the available mounting
rails. You can also use your existing rails.
•
At least two persons are required to safely lift, place, and
attach the ASUS Storage unit into a rack system.
•
Do not lift or move the ASUS Storage unit by the handles,
power supplies or the controller units. Hold the subsystem
itself.
•
Do not install the ASUS Storage unit into a rack without rails
to support the subsystem.
•
Only a qualified technician who is familiar with the installation
procedure should mount and install the ASUS Storage unit.
•
Be sure all switches are OFF before installing the ASUS
Storage unit or exchanging components.
•
Mount the rails to the rack using the appropriate screws and
flange nuts, fully tightened, at each end of the rail.
•
Do not load the rails unless they are installed with screws as
instructed.
•
The rails available for the ASUS Storage unit are designed to
safely support that ASUS Storage unit when properly
installed. Additional loading on the rails is at the customer's
risk.
•
ASUSTek COMPUTER INC. (Taiwan) cannot guarantee that
the mounting rails will support your ASUS Storage unit unless
you install them as instructed.
To lighten the ASUS Storage enclosure, remove the power
supplies. Replace the power supplies after the ASUS Storage unit
is mounted in your rack.
Cautions
Note
4