Network - D-Link DCS-5222L User Manual

Section 4 - Configuration
This section allows you to configure your LAN and Internet configuration.
Automatic IP This option is used if you would like an IP address assigned
Address Select: to your camera automatically by the DHCP server (router).
If the DHCP server does not exist you will need to manually
configure this setting should no DHCP server exist.
Static IP Address:
This option is used to manually configure your Camera's
IP settings.
HTTP Port: This option allocates the HTTP port of the camera.
RTSP Port: This option allocates the RTSP port of the camera, the
RSTP port allows connections using QuickTime or other
supported media players.
UPnP Enable: UPnP™ (Universal Plug & Play) can be used to allow
discovery of a camera as a UPnP device in your network.
UPnP Port Forward:
If your router supports UPnP, your camera and router can
communicate allowing the router to discover which ports
are used by each camera automatically without the need
to open ports or port forward.
Bonjour: Enabling Bonjour will allow discovery of cameras by Mac
computers.
D-Link DCS-5222L User Manual

Network

22