Wireless - D-Link DCS-5222L User Manual

Section 4 - Configuration
To set up your Network camera's wireless network interface settings, enable Wireless Settings in this window first. Then continue the further configuration
next.
Site Survey: Click the Rescan button to scan for available wireless
networks. After scanning, select a wireless network from
the drop-down box that you want to connect to.
SSID: The name of the wireless network.
Wireless Mode:
Use the drop-down box to select the mode of the wireless
network you wish to connect to. Infrastructure is normally
used to connect to an access point or router. Ad-Hoc is
usually used to connect directly to another computer.
Channel: If you are using Ad Hoc mode, select the channel of the
wireless network you wish to connect to, or select Auto.
Security Mode:
Select the type of authentication you are using on your
wireless network (Open, Shared (WEP), WPA-PSK, or
WPA-PSK2).
Cypher Type: If you are using WPA-PSK or WPA-PSK2 authentication,
you will need to specify whether your wireless network
uses TKIP or AES encryption. If you use Open or Shared
authentication, this setting will be automatically set for
you.
Key: Enter the key or passphase to access a secure network.
Show Hidden Key:
Check this box to display the key.
Antenna: Select to use the internal or external wireless antenna.
After making any changes, click the Save Settings button to save your changes, or click the Don't Save Settings button to discard
your changes.
D-Link DCS-5222L User Manual

Wireless

24