Brother ImageCenter„ ADS2000 Quick Setup Manual page 10

LED Indications
10
Storage Full
The connected USB flash memory drive is full. Press any key and then do one of
the following:
 Delete unused files or folders from the USB flash memory drive and then try
again.
 Use a USB flash memory drive that has available space.
Protected Device
The connected USB flash memory drive is write-protected. Disconnect the
protected USB flash memory drive, press any key and then do one of the
following:
 Turn off the USB flash memory drive's write-protection and then try again.
 Use a USB flash memory drive that has write-protection turned off.
Unsupported Device
Remove the unsupported USB device, such as a mouse or mobile device that
does not support USB flash memory drive mode, from the USB direct interface.
Hub is Unusable
A Hub or USB flash memory drive with Hub has been connected to the USB
direct interface. Disconnect any unsupported devices, such as a USB hub or a
USB flash memory drive that contains a hub.
Access Error
The USB flash memory drive was disconnected when being accessed. Press any
key.