Brother ImageCenter„ ADS2000 Product Safety Manual page 3

DO NOT place the machine near heaters, air conditioners, electric fans, refrigerators, radiators,
or water. Doing so may create the risk of a short circuit or fire should water come into contact
with the machine (including condensation from heating, air conditioning, and/or ventilation
equipment that may be sufficient to create a short circuit or fire).
DO NOT place the machine near chemicals or in a place where chemicals could be spilled on
it. Should chemicals come into contact with the machine, there may be a risk of fire or electric
shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,
or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or
electric shock. These or other chemicals may also cause the machine to malfunction or become
discolored.
The product should be placed so as not to come into contact with any wall or other device.
Otherwise, it could create a risk of overheating and/or fire.
Instead:
• Place the machine on a solid surface, never on a bed, sofa, rug, or other similar soft surface.
• Do not place this machine in a "built-in" installation unless adequate ventilation is provided.
CAUTION
Avoid placing your machine in a high-traffic area. If you must place it in a high-traffic area,
ensure that the machine is in a safe location where it cannot be accidentally knocked-over,
which could cause injury to you and serious damage to the machine.
Ensure that cables and cords leading to the machine are secured so as not to pose a tripping
hazard.
DO NOT place this machine on an unstable or tilted cart, stand, table or on any tilted/slanted
surface. The machine is heavy and may fall, causing injury to you and serious damage to the
machine.
3