Advertisement
EPSON
12/10/2001
Date:
PSB.2001.12.003
PSB #:
TE01-206 Rev. A
Reference:
EPSON Stylus Pro 7500 / 9500
Product(s):
EPSON Fiery RIP Station 5100 Series III Media/Profile Updates
Subject:
This bulletin was created to inform you of the new Media Update/Profiles for the EPSON Fiery
RIP Station 5100 Series III.
Description of Change:
The initial release of the EPSON Fiery RIP Station 5100 Series III was limited on the media list
it supported. This update provides those additional medias and profiles for use with the RIP
Station 5100 Series III. The following procedure outlines the installation and implementation of
the updated Media and Profiles for the RIP Station 5100 Series III.
Patch Installation:
1) Using the Downloader utility from the EPSON Fiery Command Workstation (PC) or Fiery
Spooler (Mac), locate and download the patch files (vl000.PS – vl990.PS) to the Print Queue.
Refer to the RIP Station 5100 Series III "Job Management Guide" for details on downloading
files to the RIP Station.
2) Once the download is completed, the RIP Station LED will display IDLE. At this point reboot
the server.
3) Next, the ICC profiles should be copied to the appropriate Color (PC) or ColorSync (Mac)
folders on your system.
Media list and Patch used:
Media Used
Photo Glossy Paper, Photo Semigloss Paper
or Premium Luster Photo Paper
Smooth Fine Art Paper or Texture Fine Art
Paper
Canvas
Heavyweight Polyester Banner
Adhesive Vinyl and Tyvek Brillion
P
S
RODUCT
UPPORT
B
ULLETIN
Set Print Mode to "Watercolor Paper-Radiant
White" and profile for this media.
Set Print Mode to "Synthetic Paper and profile
Page 1 of 3
Originator: RR
Authorization:
Total Pages: 3
Mode Used
Patch
Patch
Patch
for this media.
Advertisement
