Lexmark C792 Manual page 56

Testing and deploying workflow solutions
Property
basic.multiIP
basic.readTimeout
basic.connectionTimeout
native
basic.useRandomFileFromDirectory Determines whether a random file is used from the folder specified
basic.randomFileDirectoryPath
Advanced (e‑Task 2) prompting properties
Property
advanced.promptAnswers
advanced.addressRange
advanced.repetitions
Description
Determines whether multiple IP addresses are used for emulating
multiple e‑Task printers. If false, then only the first address
specified for basic.addressRange is used. If true, then the
number of addresses specified for basic.addressRange must
match the number specified for basic.nummfps.
The timeout in milliseconds for reading data from the LDD system
The timeout in milliseconds for connection requests to the LDD
system
This property should always be false for LDD 4.x.
in basic.randomFileDirectoryPath for simulating the
scan task. When set, these properties override files specified for
basic.scanfiles.
Specifies the folder where image files for scans can be found when
basic.useRandomFileFromDirectory is set to true
Description
A comma‑delimited list of answers to supply for prompts asked
by the profile. If left blank, the default response is used for all
prompts. If you need to supply an answer for any prompt, then
you must supply all answers for the applicable logic path.
For more information, see "Supplying answers to prompts" on
page 61.
Note: The delimiter used in the list can be changed using the
delimiter property.
The IP addresses used for emulated e‑Task 2 printers. A single
IP may be used to emulate multiple e‑Task 2 printers at a single
address, since the emulator can use multiple HTTP connections
for e‑Task 2. Multiple addresses are specified as a range, in the
format xxx.xxx.xxx.xxx‑xxx.xxx.xxx.xxx, and each
included address must be bound to a network adapter in the
local computer. If multiple addresses are specified, then only
the first is used unless advanced.multiIP is set to true.
The number of repetitions for the test on each emulated printer.
Use 0 for both this property and advanced.nummfps to
enter discovery mode.
56
Default
true
(automatically
changed to
false if the
test is run
without
specifying
multiple
addresses)
360000
180000
false
false
None
Default
None
Local IP
address (set
autotmatically
when the
simulator is
started)
0