Printing With Mac Os X - Ricoh Aficio SP 8300DN User Manual

• If you send a print job via USB 2.0 while the printer is in Low Power mode or Sleep mode, an error
message might appear when the print job is complete. In this case, check if the document was
printed.
1. After creating a document, open the [Printing Preferences] dialog box in the document's
native application.
For details about displaying the [Printing Preferences] dialog box, see p.28 "Displaying the Printing
Preferences dialog box in an application".
2. In the "Job Type:" list, select [Normal Print].
3. To print multiple copies, specify the number of sets in the "Copies:" box.
4. In the "Orientation:" list, select [Portrait] or [Landscape] for the orientation of the
document.
5. Click the [Paper] tab.
6. In the "Document Size:" list, select the size of the document to be printed.
7. In the "Input Tray:" list, select the paper tray that contains the paper to which you want to
print.
If you select [Auto Tray Select] in the "Input Tray:" list, the paper tray is automatically selected
according to the paper size and type specified.
8. In the "Type:" list, select the type of paper that is loaded in the paper tray.
9. Change any other print settings as necessary.
You can set convenient print functions on the tabs of the printer driver. For details, see "Convenient
Print Functions", Operating Instructions.
10. Click [OK].
11. Start printing from the application's [Print] dialog box.

Printing with Mac OS X

Follow the procedure below to print using the PostScript 3 printer driver for Mac OS X.
1. After creating a document, open the printing preferences screen in the document's native
application.
For details about displaying the printing preferences screen, see p.30 "Displaying the printing
preferences screen from an application"
2. In the " Paper Size:" menu, select the size of the document to be printed.
3. In the "Orientation:" menu, select the orientation of the document.
4. Select [Paper Feed] in the pop-up menu.
Standard Printing
57