Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 80

Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface
Removal & Replacement Procedures
Removing the System Board
| Home | Product Description
|
| Troubleshooting
Specifications | Connector Pin Assignments
| Illustrated Parts Catalog
| Battery Pack
19. Push in the PCMCIA
eject lever and lift the
front end of the system
board up, pull forward,
and remove the system
board from the chassis.
20. Remove all cables
from the system board.
To replace the system
board, reverse the
previous procedure.
CAUTION: Before
replacing the
system board,
check the dip
switch settings or
damage may occur
to the system
board.
Dip Switch Settings
Back to Preparing the
Computer for
Disassembly