Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 53

Notice
Removal & Replacement Procedures
When removing the interface board with the header attached occasionally the
header will remain attached to the system board. If this occurs when removing the
IMPORTANT:
interface board with the header attached, separate the header from the connector
on the system board.
When replacing interface board ensure both connectors on the board are properly
NOTE:
seated.
Removing the Interface Board with Header Attached
Maintenance & Service Guide
Presario 1600 Series Portable Computers
| Preface | Home | Product Description | Troubleshooting
| Specifications | Connector Pin Assignments
7. Lift the interface board up with the header
attached from the system board as shown.
To replace the interface board, reverse the
previous procedures.
An illustration of locations of connectors on
the interface board.
Back to Preparing the Computer for
Disassembly
| Illustrated Parts Catalog
| Battery Pack