Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 65

Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface
Removal & Replacement Procedures
Removing The Plastic Subpanel Assembly
Removing
the Battery
Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Removing the Screws from the Plastic Subpanel
Status Panel
Assembly
Interface
Board
Hard Drive
Battery
Charger
Board
CD Drive
Display
Assembly
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
| Home | Product Description
| Specifications
| Troubleshooting |
| Connector Pin Assignments
Illustrated Parts Catalog
| Battery Pack
1. Prepare
the computer
for
disassembly.
2. Remove
the screw of
the plastic
subpanel
assembly
from the
bottom of the
computer
located near
the battery
pack .
3. Remove
the palmrest
cover with
touch pad.
4. Remove
the keyboard.
5. Remove
the
heatspreader.
6. Remove
the display
assembly
with flex
cable
attached.
7. Remove
three screws
located at the
top, two
screws
located in the
right corner,
and release
the snap
located in the
left corner of
the plastic
subpanel
assembly as
shown.
Next