Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 77

Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface
Removal & Replacement Procedures
Removing The Audio Assembly Board
Removing
the Battery
Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Removing the Screws and Audio Assembly Board
Status Panel
Interface
Board
Hard Drive
Battery
Charger
Board
CD Drive
Display
Assembly
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
| Home | Product Description
| Specifications
| Troubleshooting |
| Connector Pin Assignments
Illustrated Parts Catalog
| Battery Pack
1. Prepare
the
computer for
disassembly.
2. Remove
the palmrest
cover with
touch pad.
3. Remove
the
keyboard.
4. Remove
the
heatspreader
5. Remove
the CD
drive.
6. Remove
the display
assembly.
7. Remove
the plastic
subpanel
assembly
8. Remove
the two
screws
located near
the front of
the CD drive
and PCMCIA
doors as
shown.
9. Lift the
audio
assembly
board out of
the chassis.
Back to
Preparing
the
Computer
for
Disassembly