Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 49

Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface
Removal & Replacement Procedures
Removing The Status Panel
Removing
the Battery
Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface
Board
Hard Drive
Releasing and Removing the Status Panel Cover
Battery
Charger
Board
CD Drive
Display
Assembly
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
When replacing the status panel ensure all cables are properly
replaced under the status panel and not obstructing the status panel
NOTE:
replacement.
| Home | Product Description
| Specifications
| Troubleshooting |
| Connector Pin Assignments
Illustrated Parts Catalog
| Battery Pack
1. Prepare
the
computer for
disassembly.
2. Remove
the palmrest
cover with
touch
3. Remove
the
keyboard.
4. Move the
lever
(located
directly
below the
CD Play
button on
the status
panel) to the
right to
release the
status panel
cover.
5. Support
the front
bottom
corners of
the status
panel with
the thumb
and
forefinger.
Rotate and
push the
status panel
backwards
off the
chassis as
shown
below.
Next
pad.