Attaching Labels - Brother P-Touch PT-18RKT User Manual

1
If necessary, trim the printed label to the desired shape and length using scissors,
etc.
2
Peel the backing from the label.
3
Position the label and then press firmly from top to bottom with your finger to
attach the label.
• The backing of some types of tapes may be pre-cut to make it easier to peel the backing.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive
Tapes or other special tapes and observe all precautions noted in the instructions.

Attaching Labels

1
2
3
4
5
6
7
8
9
49
Attaching Labels