Feeding Tape; Lcd Display; Lcd Contrast - Brother P-Touch PT-18RKT User Manual

GETTING STARTED
The Feed & Cut function feeds 0.89" (22.5 mm) of blank tape then cuts the tape.
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape
cassette.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
to be discharged with the tape.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the
tape to jam.
1
Press the
"Feed & Cut?" appears on the display.
2
Press the
The message "Feeding Tape... Please Wait" appears while the tape is fed, and
then the tape is cut.
Press

LCD Contrast

You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0,
-1, -2) to make the screen easier to read. The default setting is "0".
1
Press the
"LCD Contrast" using the
press the
2
Select a contrast level using the
The screen contrast changes each time you press the
or
contrast.
3
Press the
• Press the
• Pressing the
"0".
22

Feeding Tape

Feeding Tape
key.
key to feed tape.
while "Feed & Cut?" is displayed to cancel tape feeding.

LCD Display

key to display the Tools menu, select
key.
key, allowing you to set the most suitable
key.
key to return to the previous step.
key on the contrast setting screen sets the contrast to the default value
or key, and then
or key.