Rear Spacer; Fitting The Door Handles - AEG 75428-1 DT User Manual

Rear spacers
Fit the rear spacers contained in
the documentation bag to ensu-
re even dissipation of heat gene-
reted during operation. Proceed
in the sequence illustrated by the
figures.

Fitting the Door Handles

1. Screw the top handle
bracket to the handle rod
(1). Fit the bottom handle
bracket on the lower left-
hand side of the door (2).
2. Fit the top handle bracket
on the top left-hand side
of the door (3) and screw
the handle rod to the bot-
tom handle bracket (4).
Attention!
Do not over tighten the
screws (max. 2 Nm) as you
may damage the door
handles.
22