3Com 3CR17561-91-US - Switch 4500 26PORT Managed 24 10/100 2 Gbe Stackable RJ45 Getting Started Manual page 77

A file list similar to the following is displayed:
Directory of unit1>flash:/
0 -rw- 714784
1 -rw- 11043
2 -rw- 11427
3 -rw- 4529259 Apr 02 2005 01:39:57
15367 KB total (10215 KB free)
2 You can check the contents of the flash for the remaining units in the
fabric by entering:
dir unit2>flash:
dir unit3>flash:
dir unit4>flash:
dir unit5>flash:
dir unit6>flash:
dir unit7>flash:
The file list should contain one of each file type (.zip, .def, .cfg
and .app).
3 Any additional files should be considered for deletion to allow maximum
space for downloading the new files. To delete a file from the list enter:
delete/unreserved unit1>flash:/filename
To delete files from the list for the remaining units in a fabric, replace
unit1 with unit2 (on the next line) and so on for each Switch in the
fabric.
4 The /unreserved option will cause the file to be deleted from both the
flash and the recycle-bin. To check that deleted files have been removed
from the recycle-bin enter the following:
reset recycle-bin unit1>flash:/
If the recycle-bin is empty the following is displayed:
% File can't be found "unitN>flash:/"
Upgrading from the Command Line Interface
Apr 02 2005 01:36:16
Apr 02 2005 01:37:17
Apr 02 2005 00:01:01
s3p03_01_00.zip
3ComOScfg.def
3ComOScfg.cfg
s3n03_01_00s168.app
77