Using The Aux Input Terminal (Cde-9874 Series Only) - Alpine CDE-9874R Owner's Manual

PRESET NO. ARTIST NAME*
3
SONG NAME* PRESET NO.
1
* If VIEW is pressed and held for at least 2 seconds in the PS display
mode, frequency will be displayed for 5 seconds.
2
* Displayed during playback of a disc with CD text.
3
* ID3 tag
If an MP3 file contains ID3 tag information, the ID3 tag information
is displayed (e.g., song name, artist name, and album name). All
other tag data is ignored.
About the indication display
When displaying Text, the following indicators are lit
according to the mode.
Indicator/
CD Mode
Mode
––
––
Text (Disc
3
Name* ) being
displayed
Text (Track
3
Name* ) being
displayed
1
* Tag information
If there is no tag information, "ARTIST"/"ALBUM"/"SONG" is
displayed.
2
* The root folder is displayed as "FOLDER".
3
* If there is no Text (Disc Name or Track Name), "DISC TEXT"/
"TRACK TEXT" is displayed.
About "Text"
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
"text".
• Some characters may not be displayed correctly with this device,
depending on the character type.
• "NO SUPPORT" is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
16
-EN
3 3
ALBUM NAME*
iPod Mode/
MP3 Mode
BT Audio
2
Folder Name*
––
being displayed
1
Artist Name* Artist Name*
being displayed being displayed
1
Album Name* Album Name*
being displayed being displayed
1
Song Name* / Song Name*
File Name being being displayed
displayed
Using the AUX Input Terminal
(CDE-9874 Series only)
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
Press SOURCE/
the portable device.
TUNER DISC
TUNER
1
* CDE-9874 Series only.
2
* Only when the iPod is connected and AUX+ SETUP is set to OFF,
refer to "Setting the AUX+ SETUP Mode" (page 18).
3
* Displayed only when AUX+ SETUP is set to ON, refer to "Setting the
AUX+ SETUP Mode" (page 18).
4
* Displayed only when BT IN is set to BT ADAPTER. Refer to
"Bluetooth Setting" (page 17).
1
Portable player, etc.
1
1
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
, and select the AUX mode to listen to
1 2 3
AUX* iPod* /AUX+*
Main unit
or
4
BT AUDIO*