Alpine SEA-8081 Owner's Manual page 42

Digital remote control security system
Table of Contents

Advertisement

1
ACC
2
3
42
Basic Operation
Automatic (Passive) Arm-
ing
Turn the ignition off and remove the key from
the ignition.
Exit from the vehicle and close all doors.
The system will arm automatically 10
seconds after the dome light turns off (30
seconds, if so selected).
Notes:
A switch inside the main unit must be set
to the AUTO position. Please consult your
Alpine dealer if you would like to use this
option.
For your protection, the system is preset
so that the doors will not lock when the
system is armed automatically (passively).
Consult your Alpine dealer if you would
like the doors to lock when the system is
armed automatically.
If any door is opened during the 10
second exit delay time, the system will
automatically stop and reset the timer and
will begin its countdown once all the doors
are closed. In addition, if the hood and
trunk are connected to the system and are
opened, the system will again interrupt the
arming sequence and will resume the
countdown once the hood and/or trunk is
closed.
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sea-8481Sec-8448a

Table of Contents