Alpine SEA-8081 Owner's Manual page 128

1
1
(SEC-8448A)
1
1
(SEC-8448A)
128
EXT 2
EXT 3
EXT 2
EXT 3
Remote Control
(SEC-8448A)
Activating the EXT-2 Out-
put:
Press and release the EXT 2/EXT 3 button
on the remote control transmitter.
(When the EXT 2/EXT 3 button is released,
the remote control LED will blink once for first
car operation and twice for second car
operation.)
Activating the EXT-3 Out-
put:
Press and hold the EXT 2/EXT 3 button on
the remote control transmitter. The output will
stay active for as long as the button is held.
(After approximately two seconds of the EXT
2/EXT 3 button being pressed and held, the
remote control LED will blink once for first car
operation and twice for second car opera-
tion.)
English