Setting The Time; Initial System Start-Up - Alpine SEA-8081 Owner's Manual

1
1
and/et/y
2
DATE
1
(SEA-8481)
2
(SEA-8481)
3
(SEA-8481)
18
(SEA-8481)
1
3
2:05
PM
3:05
PM
3:06
PM
Basic Operation

Initial System Start-Up

Press and hold the EXT1/VALET and EXT2/
EXT3 buttons simultaneously for at least 2
seconds. This will initialize the transmitter in
preparation for time setting.

Setting the Time

Press and hold the DATE button for at least 2
seconds. The time display will blink.
While the display is blinking, press and
release the EXT1/VALET button to set the
hour.
While the display is blinking, press and
release the EXT2/EXT3 button to change the
minutes setting. Press and release the DATE
button to exit this mode.
Notes:
• The time cannot be set while the transmit-
ter is in Program mode.
• The time cannot be set when
displayed.
• If a button is not pressed within 30
seconds, time setting stops.
English
is