Alpine SEA-8081 Owner's Manual page 196

7.*
7
1
TX
PANIC
2
(SEA-8481)
8
1
TX
PANIC
2
(SEA-8481)
196
EXT-1
EXT-1 [1SEC] LATCHED
EXT-2 [1SEC] LATCHED
EXT-3 CONT. [1SEC]
EXT-4 [CONT.] 1SEC
EXT-5 LATCHED [1SEC]
EXT-6 1SEC [CONT.]
EXT-7
EXT-7 1SEC [CONT.]
EXT-8 1SEC [CONT.]
EXT-9 1SEC [CONT.]
EXT-10 [1SEC] CONT.
EXT-11 1SEC [CONT.]
EXT-12 LATCHED [1SEC]
Using the CDA-7949
(sold separately)
Security Set-Up (Contin-
ued)
Again, to change the setup feature 1 , press
and release the TX/PANIC button. To change
the setting of each feature 2 , press and hold
the EXT1/VALET button for at least 2
seconds.
Press and release the Disarm/Valet switch to
turn on and then off quickly to advance to the
next screen.
Note: The setting is possible by the operation
on pages 94 – 98.
Once finished making the appropriate
changes, press and release the Disarm/Valet
switch to turn on and then off quickly. The
CDA-7949's "Setup EXT" screen will
disappear, setup will be complete.
Note: The setting is possible by the operation
on pages 94 – 98.
English