Component Identification/Tools Required - Allstar CHALLENGER AC9300 Installation And Owner's Manual

COMPONENT IDENTIFICATION
POWER HEAD/DRIVE
RAIL ASSEMBLY
MANUAL RELEASE
TAG
BELL WIRE
SPOOL
(when supplied)
110045
HARDWARE
TOOLS REQUIRED
STEPLADDER
WOOD
BLOCK
TAPE MEASURE
TRANSMITTER
OPTIONAL
DOOR
BRACKET
W AR N I N G
! ! ! !
Child can be pinned under automatic garage
door. Death or serious injury can result.
• Never let child walk or run under moving door.
• Never let child use door opener controls.
• Always keep moving door in sight.
• If person is pinned, push control button or use
emergency release.
• Test door opener monthly:
Refer to your owner's manual
Place one-inch object (or 2x4 laid flat) on floor.
If door fails to reverse on contact, adjust opener.
If opener still fails to reverse door, repair or replace opener.
PUSHBUTTON
"WARNING" LABEL
OPENER
BAG
WALL PUSHBUTTON
HACKSAW
SOCKET WRENCH
3/8" SOCKET
7/16" SOCKET
DOOR ARM ROD
SENSOR 'U'
BRACKET
RED
RELEASE
KNOB
HAMMER
SMALL SCREW DRIVER
(1/8" HEAD)
SCREW DRIVER
4
WALL
BRACKET
110046
SAFE FINISH HARDWARE
DRILL
1/2" OPEN END
DRILL & BITS
LEVEL
DOOR ARM
TUBE SECTION
SENSOR 'L'
BRACKET
SAFE FINISH
PHOTOSYSTEM
SENSORS
WRENCH