Component Identification/Tools Required - Allstar 3000 Installation And Owner's Manual

COMPONENT IDENTIFICATION
OPENER HEAD UNIT
SECTIONAL
ONE-PIECE
DOORS DOORS
DOOR MOUNTING
BRACKETS
RUBBER BUMPER
RELEASE ROPE
HARDWARE
TOOLS REQUIRED
STEPLADDER
WOOD
BLOCK
MASTER
LINKS
!
Child can be pinned under automatic garage
door. Death or serious injury can result.
• Never let child walk or run under moving door.
• Never let child use door opener controls.
• Always keep moving door in sight.
• If person is pinned, push control button or use
emergency release.
• Test door opener monthly:
AND HANDLE Refer to your owner's manual
Place one-inch object (or 2x4 laid flat) on floor.
If door fails to reverse on contact, adjust opener.
If opener still fails to reverse door, repair or replace opener.
PUSHBUTTON
"WARNING" LABEL
OPENER
BAG
WALL PUSHBUTTON
HACKSAW
SOCKET WRENCH
3/8" SOCKET
7/16" SOCKET
TAPE MEASURE
DRIVE
CHAIN
CHAIN
GUARD
TEE RAIL
W AR N I N G
HAMMER
SMALL SCREW DRIVER
(1/8" HEAD)
SCREW DRIVER
4
TROLLEY
OUTER HALF
WALL
MOUNTING
BRACKET
FRONT IDLER
ALL-CLEAR
PHOTOSYSTEM
ALL-CLEAR HARDWARE
DRILL
1/2" OPEN END
DRILL & BITS
LEVEL
DOOR ARMS
CHAIN LIMIT
CAM
WRENCH