Auxiliary Equipment Wiring Diagram - Allstar 3000 Installation And Owner's Manual

WIRING AUXILIARY EQUIPMENT
SERIES CONNECTION (RECEIVER FIRST)
102121
Your Allstar Residential Garage Door Opener is furnished with an enhanced All-Clear™ Photosystem. New features
include:
Time-Saving Electrical Connections. No screw terminals! Just strip the ends of the wires back 5/16 inch and plug
them into the self-locking connector. This is the same feature as found on millions of duplex electrical outlets. Wires
may be released using a small screwdriver. (To avoid damage to unit, the widest possible screwdriver head which will
fit into slot should be used. Use a screwdriver head no narrower than 1/8 inch.)
Universal Wiring Capabilities. The All-Clear™ Photosystem can be wired in series or parallel combinations.
Virtually any existing wiring can be used. See the figures above.
Improved Sunlight Immunity. Under certain conditions, direct sunlight can overpower photobeam systems. We
have provided an extra internal shield to reduce sunlight problems. When required, the position of the transmitter
and receiver may be interchanged with out rewiring.
21