Troubleshooting - LG 26LH1DC3 - - 26" LCD TV Installation And Operating Manual

APPENDIX
TROUBLESHOOTING
Some quick and easy tips to resolving problems
Software Problems
® Remove power cord for 5 minuts.
® Start all over with item 11Z set to 001, press Enter then redo Auto Program, Channel List, Clock, etc.
*Note: 2-5-4 + MENU can be done more than once.
@ After Auto Program and Channel
List, etc. press 2-5-5 + MENU to transfer channels and TV setup to
internal TV controller. Afterward, only Physical or only Virtual channels will appear in digital channel scan,
analog channel scan will be normal.
*Note: Be sure to set item 028 Ch Overide to 000.
@ After 2-5-5 + MENU, only channels included in TV controller will appear.
If channel is available, redo channel scan. If it is not available it will not appear on the TV screen.
"D
"D
m
z
E3
X
@ See troubleshooting flow chart.
Display Panel Picture
@ Connect Antenna/Cable signal source to 26LH1 DC5/4/5.
® Check connections on 26LH1DCS/4/5.
® If applicable, connect M.RI. cable to M.RI. device.
@ Try another channel.
69