Vcr Setup - LG 26LH1DC3 - - 26" LCD TV Installation And Operating Manual

EXTERNALEQUIPMENT SETUP
VCR SETUP
m
x
-4
m
z
m
c
m
z
-4
m
--4
C
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover
the product bearing this phenomenon.
When connecting with an antenna
1. How to connect
o
Connect the RF antenna out socket of the
VCR to the ANTENNA/CABLE socket on
the set.
Connect the antenna cable to the RF antenna
in socket of the VCR.
How to use
Set VCR output switch to 3 or 4 and then tune
TV to the same channel number.
Wall Jack
Antenna
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner's manual.)
16