LG 26LH1DC3 - - 26" LCD TV Installation And Operating Manual page 67

26LH1 DC3/4/5 Camport Auto Sense Operation
The CAMPORT Auto Sense function is enabled
when:
1. Installer Menu Item 34, CAMPORT EN is set to
1 AND
2. Installer Menu Item 40, AUTO CAMPORT is
enabled (1).
Selectable = Can be accessed with TV/AV key,
direct access, etc.
Auto Sense= Switches to this input when
connector is inserted.
The camport (Front Video) has the highest priority
and will override any commands including tuning to
the Start Channel.
CAMPORT (Front Video) Functionality Control
Item 34 Item 40 Front Video
CAMPORT EN AUTO CAMPORT Operation
0 0 Disabled
0 1 Disabled
1 0 Selectable
1 1 Auto Sense
CAMPORT Operation (Stand-Alone)
When Camport Auto Sense is enabled as above,
the TV's source will switch to the front video
whenever a plug is inserted into any of the front
panel video inputs (either composite Video or
S-Video).
When the plug is removed, the TV will switch back
to the Previous channel or input source that the
TV was using before the Plug was inserted.
However, if any direct access to an RF channel or
Aux channel is requested while the camport is
active, then, when the camport plug is removed,
the TV will switch to the last requested channel.
Source changes using any Source Keys (TV/AV)
are ignored. Channel Up/Channel Down and
Flashback Commands are not direct access tuning
commands and they are also ignored.
Previous State Operation State State
Before Inserting While CAMPORT Upon Removal
CAMPORT Is Active Of CAMPORT
Aux or RF Channel None Previous Aux
or RF Channel
Aux or RF Channel Direct Access Last Requested
RF or Aux Channel
Aux or RF Channel Ch Up/Down, Previous Aux
Flashback or RF Channel
and TV/AV Keys
N
0
r'rl
N
J
>
r-"
0
I'rl
CAMPORT Operation (PPV)
The operation will be similar to that of the
Stand-Alone mode.
However, the PPV providers may send different
commands to the TV for the same user commands.
For instance, some providers will always send a
direct tune command when it receives a channel
up/down or a flashback command while other PPV
providers will just send a key command.
Previous State Operation
Before Inserting While CAMPORT
CAMPORT Is Active
Aux or RF Channel None
Aux or RF Channel Direct Access
Aux or RF Channel
Ch Up/Down,
Flashback
and TV/AV Keys
State
Upon Removal
Of CAMPORT
Previous Aux
or RF Channel
Last Requested
RF or Aux Channel
Last Requested
Channel if PPV
translates it to direct
access tuning
command. Otherwise,
goes to Previous Aux
or RF Channel
67