Panasonic DP-C354 Operating Instructions Manual page 13

Table of Contents

Advertisement

6
Insert a PCMCIA/PC Card Adapter
with a memory card.
Push on the slot cover to open it.
Insert a PCMCIA/PC card into the PCMCIA/
PC Card slot as illustrated. (Label side up)
7
Select "PC Card".
Only one storage device can be selected at
a time. When the "PC Card" is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card, or Hard
Disk Drive at the same time.
8
Press the Start key.
The scanned image is saved into the
PCMCIA/PC Card.
The scanned data is saved on the following
directory of the memory card.
Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
The data saved on the memory card in the
PC Card Adapter can be printed by this
machine or another DP-C354, DP-C264,
DP-C323, DP-C263 or DP-C213. For more
details, refer to Printing from SD Memory
Card/PC in the Operating Instructions (for
Basic Operations). When printing PDF data,
or high-compression PDF data, install and
set up the Memory Card Print Utility. For
details, refer to the Help of the Memory Card
Print Utility on the Document Management
System CD-ROM.
9
Push the Eject button on the right side
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card
Adapter.
Eject button
Do not remove the PCMCIA/PC Card while
the Access Indicator is flashing.
10
Close the Slot Cover.
When canceling the operation, press the Stop key
on the Control Panel, and then select "Yes" on the
Touch Panel Display.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-c264Dp-c323Dp-c263Dp-c213

Table of Contents