Panasonic Toughbook CF-19KDRAXCM Service Manual page 40

n Assembly of LCD Rear Case
<Note>
Arrow without specified measurement: 0 ~ 0.5 mm
Allowable right/left displacement of the Cushion: max. 0.5 mm
Attach and apply the load 30 ~ 40N (3.0 ~ 4.0 Kgf).
LCD Cushion 1
Match to
the rib.
0~0.5mm
Match to
the level.
0~1mm
LCD Cushion 2
n Assembly of Tablet Latch Cover and Antenna Cover
Screw (N4)
Insert the
Hook first.
Insert into the
Cabinet and fix it.
ANT Cover
Places of tighten a screws
10 Places
Screw (N15)
12 Places
Screw (N7)
in numerical order
(same the frontside)
Don't forget fixing with screws
Match to
LCD Cushion 3
the level.
0±0.5mm
0~1mm 0~1mm
LCD Rear Ass'y
LCD Cushion 2
0±1mm
PET Sheet
0±1mm
Screw (N16)
Torque of tightening screw (N15) :0.5 0.02N m( 5.0 0.2kgf cm)
Torque of tightening screw (N7) :0.4 0.02N m( 4.0 0.2kgf cm)
Torque of tightening screw (N4) :0.5 0.02N m( 5.0 0.2kgf cm)
Torque of tightening screw (N16) :0.8 0.08N m( 8.0 0.8kgf cm)
Don't get onto a step.
Panasonic Badge
Match to
the level.
0~0.5mm
Match to
the level.
0~1mm
Screw (N4)
Insert into the
Cabinet and fix it.
Tablet Lacth Cover
Screw (N16)
9-17
Insert the
Hook first.
Insert into the
Cabinet and fix it.
ANT Cover