Using Burst; Reducing The Effects Of Camera And Subject Movement - HP p650 User Manual

Using Burst

Procedure
[ ] (REC) [SET]
While Burst is turned on, images are continually recorded until memory becomes full,
as long as you keep the shutter button depressed.
Releasing the shutter button stops shooting.
NOTE
• With burst, exposure and focus for the first image are applied for successive
images as well.
• Burst cannot be used in combination with any of the following.
– Some Scene Mode scenes
– Movie Recording
• When using a burst mode, keep the camera still until all recording is finished.
• The burst rate depends on the current image size and image quality settings.
• The speed of Burst depends on the type of memory card loaded in the camera and
the amount of free space available for storage. When shooting to built-in memory,
burst shooting is relatively slow.
• You cannot use the self-timer in combination with Burst.

Reducing the Effects of Camera and Subject Movement

(Stabilizer)
Procedure
[ ] (REC) [SET]
You can turn on the camera's Stabilizer feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Your digital camera is equipped with a CCD shift type camera shake correction
feature and a high-sensitivity anti image blur feature. These two features work in
concert to minimize the effects of hand and subject movement.
Auto Minimizes the effects of hand and subject movement.
Off Turns off Stabilizer settings
MENU REC Tab
MENU REC Tab
54
Burst
Stabilizer