Setting Surface Controls; Usingthetouchcontrols; Cooktopmainpowerpad; Controlslock Pad - Electrolux EW36IC60I - 36 in. Induction Cooktop Use And Care Manual

Cooktop
Control Pads
USINGTHETOUCHCONTROLS
m m m m m m m [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The recommended way to use the touch pads on the cooktop is with your finger
placed in the center of the touch pad. If the finger is not placed on the center of a
pad, the cooktop may not respond to the selection made.
Lightly contact the pad with the flat part of your entire fingertip. Do not just use the
narrow end of your fingertip.
COOKTOPMAmN POWERPAD
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Fig. 1 Fig. 2
The Cooktop POWER key pad enables the entire Cooktop.
To power the cooktop, touch and hold the POWER key pad for 1/2 second. A beep will
sound and the Power LED will glow (See Fig. 2). The cooktop will be in a ready mode
for 10 seconds. If no other key pads are touched the Cooktop Main POWER will turn
OFF automatically.
To turn the Main Power OFF touch Main POWER key. A beep will sound and the Power
Indicator Light will turn OFF (See Fig. 1).
CONTROLSLOCK PAD
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Fig. 3 Fig. 4
CONTROLS LOCK - The Induction Cooktop may be locked in order to prevent the
cooktop from accidentally being turned ON.
To turn ON the Controls Lock feature, make sure the unit is powered OFF (See above,
Figure 1). Touch and hold the LOCK key pad for 3 seconds. A beep will sound and the
Lock indicator light will glow (Fig. 4). Once locked, no other displays will glow and no
Cooking Zones will activate.
To turn the Controls Lock OFF, touch and hold the LOCK key pad for 3 seconds. A
beep will sound, the Lock indicator light will turn OFF (Fig. 3) and the cooktop may be
used normally. Remember to power ON the cooktop if it is needed right away.
M NUTET MER PAD
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping
track of time. This feature will keep track of time from 1 to 99 minutes. The timer
display will begin to count down minutes once set.
To Set the Minute Timer feature, touch the "TIMER" key (Fig. 5). Touching and
releasing the _ or the m key pads (Fig. 6) will increase or decrease the Minute
Timer setting by 1 minute with each key press (up to 99 minutes).
Once the Timer LED displays the desired amount of time, release the '4= or the
Arrow key pads (Fig. 6). The Minute Timer will begin the countdown with remaining
minutes. Once the Minute Timer reaches 1 minute, the timer will start counting down
by seconds until DOis reached. Once the Minute Timer reaches DO a long beep will
sound indicating that the time is up and the Timer display will flash nn
UU.
To cancel or turn OFF the Minute Timer, touch the "TIMER" key (Fig. 5).
ii!_i