Playing Music - Nextar SNAP3 - Automotive GPS Receiver Hardware Instruction Manual

Playing Music

The unit is designed with SD card slot and supports MP3 and WMA format files playback.
To use the MP3 player, you will need to have an SD card with your MP3 music files
preloaded. Please note that you cannot use the navigation function of the device at the
same time you are using the MP3 player. Remove the mapping software SD card that
comes with the device from the SD card slot on the side of the unit. Then insert your SD
card with your MP3 or WMA music files.
Note: Please take care of the mapping SD card if you remove it to use the MP3
player as the navigation function will not work without it.
Warning: For your own safety, do not use the earphones when driving.
A note regarding the MP3 function:
The unit has the ability to play your favorite MP3 music files. This is accomplished by
using the unit's SD card slot, located on the right side.
 MP3 files should previously reside on the user's SD card.
 MP3 files can be imported to the user's SD card on a PC, using a variety of
programs, such as Windows Media Player.
 This process should be performed independent of the navigation unit.
Do not attempt to use the unit to read and burn MP3 files from an external source.
Playing Music
In the main menu, tap to enter the MP3 Player, as shown below:
In the MP3 player, tap in the top right corner to exit.
20