Playing Music - Nextar X3I-02 - Automotive GPS Receiver Important Safety Instructions Manual

The unit is designed with SD card slot and supports MP3 and WMA format files playback.
To use the music player, you will need to have an SD card with your MP3 music files
preloaded. Please note you cannot use the navigation function of the device at the same
time as using the music player. Remove the mapping software SD card that comes with
the device from the SD card slot on the side of the unit. Then insert your SD card with
your MP3 or WMA music files.
Note: Please take care of the mapping SD card if you remove it to use the music
player as the navigation function will not work without it.
Warning: For your own safety, do not use the earphones when driving.
A note regarding the music playing function:
The unit has the ability to play your favorite MP3 music files. This is accomplished by
using the unit's SD card slot, located on the right side.
MP3 files should previously reside on the user's SD card.
MP3 files can be imported to the user's SD card on a PC, using a variety of
programs such as Windows Media Player.
This process should be performed independent of the navigation unit.
Do not attempt to use the unit to read and burn MP3 files from an external source.

Playing Music

In the main menu, tap
In the music player, tap
to enter the playback menu, as shown below:
in the top left corner to exit.
17
Playing Music