External Cleaning; Prolonged Periods Of Non-Operation; Frost Precautions; Moving The Machine - Electrolux ESL 46010 User Manual

If residues of soil have clogged the
holes in the spray arms, remove them
with a cocktail stick.
Clean the external surfaces of the
machine and control panel with a
damp soft cloth. If necessary use only
neutral detergents. Never use
abrasive products, scouring pads or
solvent (acetone, trichloroethylene
etc....).
Ensure that the seals around the
door, the detergent and rinse aid
dispensers are cleaned regularly with
a damp cloth.
We recommend every 3 months to
run the wash programme for heavy
soiled dishes using detergent but
without dishes.
If you are not using the machine for
any period of time you are advised to:
1. Unplug the appliance and then
turn off the water.
2. Leave the door ajar to prevent the
formation of any unpleasant
smells.
3. Leave the inside of the machine
clean.
Avoid placing the machine in a
location where the temperature is
below 0°C. If this is unavoidable,
empty the machine, close the
appliance door, disconnect the water
inlet pipe and empty it.
If you have to move the machine
(moving house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and
discharge hoses.
4. Pull the machine out together with
the hoses.
Avoid over tilting the machine during
transportation.
electrolux